Excavating. Material handling. Grading. The Dingo® TX series of compact loaders has you covered. No need for separate machines to unload, haul, dig and place material; the Dingo® TX series of compact loaders can do it all. With the benefits of a compact utility loader, mini excavator and compact track loader rolled into one piece of equipment, it’s a smart solution that’s in a category of its own.
|25 HP (18.6 kW) Engine Kubota®
|0.36 bar (5.2 psi)
|0 to 4.0 mph fwd, 0 to 2 mph rev.
|Hinge Pin Height
|Narrow track – 85.6cm Wide track – 104cm
|Narrow track – 854Kg Wide track 902Kg
|Operating Capacity (Rated at 35%)
|Flow and pressure
|43.2 L/min @ 3000Psi
Diesel. Done Right. Our diesel Dingo TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 52.2 L/min and pumping 18.6 kW (25 hp) to the attachments, yet has a ground pressure as low as 0.36 bar (5.2 psi). And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it.
Exclusive TX Track Drive
Low centre of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tyre ruts and flat tyres.
Liquid-Cooled Diesel Engine
The 18.6 kW (25 hp) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labour. Plus it provides zero radius turn capability for unmatched manoeuvrability.
Ease of use
The TX427 goes everywhere you need it to go: residences, cemeteries, golf courses, sports fields, office and apartment complexes, parks, and more.
Up to 34 L/min at 207 bar hydraulic system gives you incredible hydraulic power to auger up to 76 cm holes or trench 91 cm deep.
You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.